ANAMORPHIC
Select an
Anamorphic
setting, if applicable. The anamorphic setting de-squeezes the image on the monitor and
marks the footage as anamorphic in the clip metadata. When you open the clip in REDCINE-X PRO, the program
automatically de-squeezes the image. The available anamorphic settings depend on your camera type.
The camera supports anamorphic 1.3x and 2x with each format.
DE-SQUEEZED RESOLUTION AND DE-SQUEEZED ASPECT RATIO
When you enable anamorphic, both the actual format and the de-squeezed format display at the bottom of the Format
menu. To view the actual format and the de-squeezed format, go to
Menu
>
Settings
>
Project
>
Format
>
Format
.
When anamorphic is enabled, the camera does not crop the sensor image, so the recorded image has the same
resolution and dimensions as the corresponding non-anamorphic format.
After de-squeezing the footage in post production, the resulting footage has a different format than the original
recorded image. The format of the de- squeezed footage is the second format (resolution and aspect ratio) that
displays on the Format menu.
Since the camera does not crop the image, you will have additional horizontal area to frame the image. Then, crop or
scale the footage to the intended aspect ratio.
Figure: De-Squeezed Resolution and De-Squeezed Aspect Ratio
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
9 5 5 - 0 1 3 3 _V 6 .3 , R EV - H
|
1 0 2
SCARLET-W OPERATION GUIDE
