NIKON F-MOUNT LENSES
This section describes the appropriate method for attaching and detaching Nikon® F- Mount lenses. For more
information, refer to the original manufacturer’s instructions. This section also lists lenses supported by the DSMC
Nikon F-Mount.
WARNING:
ALWAYS protect your equipment, when it is not in use, by replacing lens caps and mount caps.
ATTACH NIKON F-MOUNT LENSES
1. Rotate the secondary locking ring counter-clockwise to disengage.
2. Press the lens release button and rotate the lens cap clockwise to remove the camera mount cap.
3. Remove the rear lens cap.
4. Align the mounting index (white dot) on the lens with the mounting index on the DSMC Nikon mount and position
the lens in the bayonet mount.
5. Rotate the lens counter-clockwise until it clicks into place, being careful to NOT press the lens release button.
6. Rotate the secondary locking ring clockwise to engage.
DETACH NIKON F-MOUNT LENSES
1. Rotate the secondary locking ring counter-clockwise to disengage.
2. Press and hold the lens release button. While holding the lens release button, turn the lens clockwise until it stops
and remove it from the camera mount.
3. Replace the rear lens cap and camera mount cap when items are not in use.
DSMC NIKON MOUNT SUPPORTED LENSES
The DSMC Nikon Mount electronically supports the following lenses:
COMPATIBLE LENS TYPE
FOCAL LENGTH
Nikkor AF
AF Nikkor 28mm f/2.8D
AF Nikkor 50mm f/1.8D
AF DX Fisheye-Nikkor 10.5mm f/2.8G ED
AF Fisheye-Nikkor 16mm f/2.8D
AF Nikkor 35mm f/2D
AF Nikkor 50mm f/1.4D
1, 2
AF Nikkor 85mm f/1.4D IF
AF Nikkor 200mm d/1.4D ED Micro
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
9 5 5 - 0 1 3 3 _V 6 .3 , R EV - H
|
2 4 3
SCARLET-W OPERATION GUIDE
