SIMULTANEOUS RECORD
NOTE:
HD- SDI and HDMI ports are only available on select DSMC2 expanders. For more information, go to
"Input/Output Connectors" on page 205
.
You can record simultaneously to an external recorder and a RED SSD. To record simultaneously, follow the
instructions below:
1. Attach a DSMC2 expander that has an HD-SDI or HDMI port.
2. Connect the camera to an external recorder with an HD-SDI or HDMI cable.
3. Ensure an SSD is inserted in the camera and formatted.
4. Set up the HD-SDI or HDMI output:
A. Go to
Menu
>
Settings
>
Display
>
Monitor Control
>
Monitor Setup
.
B. Select
HDMI
or
HDSDI
from the drop-down menu at the top of the menu.
C. Select
Clean
from the
Mode
drop-down menu (otherwise the external recorder records the overlay).
D. Select the output resolution from the
Resolution
drop-down menu.
NOTE:
The HDMI and HD-SDI maximum resolution is 1080p. For more information, go to
5. Disable all False Colors (otherwise the external recorder records the False Colors):
A. Go to
Menu
>
Settings
>
Display
>
Tools
.
B. Select
Off
from the
False Color
drop-down menu.
6. If monitoring audio via a third-party monitor that supports audio, set up the monitor mix:
A. Go to
Menu
>
Settings
>
Audio
>
Mix
>
Monitor Mix
.
B. Adjust the input channels.
7. Go to
Menu
>
Settings
>
Recording
>
Mode
.
8. Select
Local
from the
Storage
drop-down menu.
9. Begin recording.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
9 5 5 - 0 1 3 3 _V 6 .3 , R EV - H
|
5 1
SCARLET-W OPERATION GUIDE
