HORIZON
Displays an overlay that provides a reference to the position of the horizon. The Horizon overlay consists of two (2)
short side-bars that are always horizontally centered on the monitor, and a single longer horizon-line that adjusts to the
horizon based on the orientation of the camera.
The side-bars are green if the pitch is /– 1° of the calibrated zero position, otherwise they are red. The horizon-
line is green if the roll is /– 1° of the calibrated zero position, otherwise it is red.
To add numerical values for the pitch and roll to the Horizon overlay, follow the instructions below:
1. Go to
Menu
>
Settings
>
Display
>
Monitor Control
>
Overlay
.
2. Select
Create...
,
Clone...
, or
Edit...
, respectively, for the desired overlay action.
3. Select a location on the interface to add the numerical data for the Horizon overlay.
4. Select
Motion: Gyro Data (GYRO)
from the
Item
drop-down menu.
5. Select the desired text size.
6. Select
Add
.
7. Select
Save
.
8. Go to
Menu
>
Settings
>
Display
>
Monitor Control
>
Monitor
, and select the overlay from the
Overlay
drop-
down menu.
NOTE:
The internal gyroscope and accelerometer must be calibrated for the Horizon overlay to function properly. For
more information, go to
"Gyroscope and Accelerometer Calibration" on page 132
.
ZEBRAS
Use Zebra mode to enable and adjust the upper and lower values for two (2) independent zebra indicators. Use Zebra
1 for highlight exposure, and use Zebra 2 for mid-tones or shadows. Zebras are visible in Magnify mode and are
disabled by default.
The camera offers two (2) zebra types:
Video
: IRE-based mode; evaluates based on the current ISO and Look settings, and not the RAW image.
RAW
: Evaluates based on the RAW image.
For more information, see the
Exposure with RED Cameras: False Color & Zebra Tools
article , available at
www.red.com/learn/red-101/exposure-false-color-zebra-tools
.
ENABLE ZEBRA INDICATORS
1. Go to
Menu
>
Settings
>
Display
>
Zebra
.
2. Select a
Zebra
check box.
Zebra 1
:
Video
: Areas of the image exposed within the IRE range are indicated by red diagonal lines at –45°. Default
is 98 to 100 IRE.
RAW
: Areas of the image exposed within the range of stops are indicated by solid red. Default is 15.80 to
16.00 stops.
Zebra 2
:
Video
: Areas of the image exposed within the IRE range are indicated by green diagonal lines at 45°. Default
is 41 to 48 IRE.
RAW
: Areas of the image exposed within the range of stops are indicated by solid purple. Default is 0.00 to
4.00 stops.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
9 5 5 - 0 1 3 3 _V 6 .3 , R EV - H
|
8 0
SCARLET-W OPERATION GUIDE
