PROJECT
The Project menu includes: Frame Rate, Exposure, Timecode, Slate, Format, and Sensor.
FRAME RATE
RECORDING FRAME RATE
Select the recording frame rate (also referred to as the capture frame rate). The recording frame rate is the number of
frames per second (fps) that are recorded. The recording frame rate is different from the project time base, which is the
rate at which the footage will be played back.
The default recording frame rate is 23.98 fps. If you change the project time base, the recording frame rate
automatically changes its value to match the project time base.
The maximum frame rate for each format is determined by several factors, including project time base and
REDCODEproject time base, REDCODE, and Lookaround. For more information about the maximum REDCODE
settings for each common recording frame rate, see the
, available at
.
PROJECT TIME BASE
Select the project time base, which is the rate at which the footage will be played back. The project time base
displays in the lower left corner of the display.
The following project time bases are available:
23.98 fps (Default)
24.00 fps
25.00 fps
29.97 fps
47.95 fps
48.00 fps
50.00 fps
59.94 fps
VARISPEED
When a recording frame rate other than the current project time base is selected, the fps text turns yellow and the word
Varispeed replaces the Audio Meter in the lower right corner of the display.
Audio is not recorded in Varispeed mode.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
9 5 5 - 0 1 3 3 _V 6 .3 , R EV - H
|
9 6
SCARLET-W OPERATION GUIDE
