SYNC (VIDEO SYNC IN) WITH CONTACT CLOSURE STYLE
TRIGGER INPUT
The following expanders feature a SYNC connector with contact closure style trigger input:
DSMC2 Jetpack Expander
DSMC2 Jetpack-SDI Expander
DSMC2 V-Lock I/O Expander
The 4-pin 00B LEMO SYNC connector accepts timecode, genlock, and General Purpose Input (GPI) signals. To
operate the GPI contact closure style trigger, short Pin 2 (GPI) to Pin 1 (ground).
WARNING:
DO NOT apply voltage to Pin 2 (GPI).
Figure: Front Face of the SYNC (Video Sync) Connector (Looking at the Camera)
4-PIN 00B LEMO SYNC CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
1
GROUND
Common ground
N/A
2
GPI
General purpose input trigger; contact closure to Pin 1
In
3
TIMECODE
SMPTE unbalanced timecode input
In
4
GENLOCK
Tri-level sync input
In
NOTE:
Mating connector is FGG.00.304.CLAD.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
9 5 5 - 0 1 3 3 _V 6 .3 , R EV - H
|
2 1 5
SCARLET-W OPERATION GUIDE
