manualshive.com logo in svg

Red Hat ENTERPRISE LINUX AS 2.1 -, Installation Manual

The Installation Manual for Red Hat Enterprise Linux AS 2.1 is available as a free download on 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions for installing and setting up the advanced server edition. Get your copy now and effortlessly deploy this powerful Linux solution.

Share
Download
background image

204

Index

clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
GRUB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LILO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
time zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

consoles, virtual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Custom

disk space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
installation types . . . . . . . . . . . . . . . . . . . . . . . . . . 22

D

dd

creating installation diskette . . . . . . . . . . . . . 21

deleting partitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
dependencies

installing packages . . . . . . . . . . . . . . . . . . . . . . . . 71

disk

driver .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

Disk Druid

adding partitions . . . . . . . . . . . . . . . . . . . . . . . . . . 49

filesystem type . . . . . . . . . . . . . . . . . . . . . . . . . 51

buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
deleting partitions . . . . . . . . . . . . . . . . . . . . . . . . . 52
editing partitions . . . . . . . . . . . . . . . . . . . . . . . . . . 52
partitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

disk partitioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
disk space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
disk space requirements . . . . . . . . . . . . . . . . . . . . . 19

custom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

diskette

boot, creating .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
making under Linux-like OS. . . . . . . . . . . . . 21
making with MS-DOS . . . . . . . . . . . . . . . . . . . . 21
network boot, creating . . . . . . . . . . . . . . . . . . . . 20

documentation

other manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

driver disk . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 32, 201

creating from image . . . . . . . . . . . . . . . . . . . . . 202
produced by others. . . . . . . . . . . . . . . . . . . . . . . 201
produced by Red Hat . . . . . . . . . . . . . . . . . . . . 201
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202

E

editing partitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

/etc/sysconfig/ha/lvs.cf

file . . 112

expert installation mode . . . . . . . . . . . . . . . . . 34, 86
extended partitions. . . . . . . . . . . . . . . . . . . . . . . . . . 187

F

fdisk

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

filesystem

formats, overview of . . . . . . . . . . . . . . . . . . . . . 180

filesystem types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
fips partitioning utility. . . . . . . . . . . . . . . . . . . . . . 195
firewall configuration. . . . . . . . . . . . . . . . . . . . . . . . 59

customize incoming services. . . . . . . . . . . . . 61
customize trusted devices . . . . . . . . . . . . . . . . 61
security levels

high. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
no firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

FTP

installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

FTP, clustering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

( See also LVS clustering )

G

GNOME

introduction to. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

GRUB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53, 57

alternatives to. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

boot disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
commercial products. . . . . . . . . . . . . . . . . . . 56
LOADLIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Summary of Contents for ENTERPRISE LINUX AS 2.1 -



















































































































































































































Reviews:

No comments

Related manuals for ENTERPRISE LINUX AS 2.1 -

Waves Multimaximizer L3-16 User Manual preview
Multimaximizer L3-16
Brand: Waves Pages: 23
ACRONIS DISK DIRECTOR SUITE 10 User Manual preview
DISK DIRECTOR SUITE 10
Brand: ACRONIS Pages: 127
Drobo How-To Manual preview
How-To
Brand: Drobo Pages: 6
Agilent Technologies N5416A Release Notes preview
N5416A
Brand: Agilent Technologies Pages: 9
F-SECURE MOBILE SECURITY 6 FOR ANDROID Manual preview
MOBILE SECURITY 6 FOR ANDROID
Brand: F-SECURE Pages: 22
Oracle Secure Backup 10.3 Installation And Configuration Manual preview
Secure Backup 10.3
Brand: Oracle Pages: 174
GRASS VALLEY EDIUS - INSTALLATION V6.0 Installation Manual preview
EDIUS - INSTALLATION V6.0
Brand: GRASS VALLEY Pages: 23
Fellowes MediaFACE 4.01 User Manual preview
MediaFACE 4.01
Brand: Fellowes Pages: 170
Garmin Que Application Manual preview
Que
Brand: Garmin Pages: 33
Samsung SCX 6322DN - B/W Laser - All-in-One Manual preview
SCX 6322DN - B/W Laser - All-in-One
Brand: Samsung Pages: 40
Epson Stylus Pro 5500 Printer Manual preview
Stylus Pro 5500
Brand: Epson Pages: 120
KAPERSKY ANTI-VIRUS 4.5 - FOR MICROSOFT EXCHANGE SERVER User Manual preview
ANTI-VIRUS 4.5 - FOR MICROSOFT EXCHANGE SERVER
Brand: KAPERSKY Pages: 146
KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI FILE SERVER User Manual preview
ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI FILE SERVER
Brand: KAPERSKY Pages: 214
Lenovo ThinkPad R61 Brochure preview
ThinkPad R61
Brand: Lenovo Pages: 4
Lenovo ThinkPad R61 Hardware Maintenance Manual preview
ThinkPad R61
Brand: Lenovo Pages: 254
Patton electronics ForeSight 6300 NMS Quick Start Manual preview
ForeSight 6300 NMS
Brand: Patton electronics Pages: 8
Kodak 1516756 Brochure preview
1516756
Brand: Kodak Pages: 2
Oris PEARLPROOF W6400 Datasheet preview
PEARLPROOF W6400
Brand: Oris Pages: 3

Brands by name

Popular brands

Load more brands