Q
g
22
16-CLEANING
REMEMBER THAT ONLY A CORRECTLY POSITIONED AND CLEAN BRAZIER CAN GUARANTEE SAFE IGNITION AND
OPTIMAL OPERATION OF YOUR PELLET PRODUCT. IN CASE OF FAILED IGNITION AND AFTER ANY OTHER LOCK STATE
OF THE PRODUCT, IT IS ESSENTIAL TO EMPTY THE BRAZIER BEFORE EVERY RESTART
For the brazier to be cleaned properly, remove it from its housing completely and thoroughly clean all the holes and the grate on the
bottom. If good quality pellets are used, you will normally only need to use a brush to restore the optimal operating conditions of the
component.
Cleaning the ash box
To clean the ash box, lift the grid “
g
” simply by turning it until it rests against the stove firebox. Wipe away any residual ash before
lowering the grid “
g
”. The quality of the pellets used and user experience will determine the cleaning frequency required.
However, it is
recommended not to exceed 2 or 3 days.
Attention! When cleaning is completed, remember to put the brazier in and lower grate “g”.
Summary of Contents for LOTO Multiair
Page 35: ......
