Correct usage guide
Replacing the atomizer core:
Hold the atomizer upside down before exchanging the core. Rotate the atomizer base counterclockwise until you can pull it out of the tank.
Unscrew the atomizer core counterclockwise and replace it with the new core. Reassemble all parts.
Adjust Airflow
To adjust the airflow, please rotate the rotating valve of the atomizer. If the valve is nearly closed, then the atomizer is set-up for classical
vaping. If the valve is completely open, then the atomizer is set-up straigth to lung (STL) vaping.
Charge Battery
When the battery is empty, the status LED flashes red repeatedly and the device switches off by itself. When this happens, change the
battery. To charge the battery, insert the micro USB plug of the original cable into the 5 pin micro port in the bottom of the battery. Connect
the USB cable either directly to a USB-Port or a 220 volt USB adapter (sold separately). The battery will start to charge, if connected to the
power and the LED near the micro USB port flashes red. Is the battery fully charged, the red LED switches off. It is normal when the battery
will be warum during charing.