Product Code: RLATJ20T
Made in China to TQB Brands Pty Ltd specifications
Page 6
Visit us at www.tqbbrands.com.au
3.
BEFORE USE
Prior to each use conduct a visual inspection checking for abnormal conditions, such as
cracked welds, leaks, and damaged, loose, or missing parts.
•
Consult the vehicle owner’s manual to determine the location of lift points.
•
Be sure to set the vehicle in park with the emergency brake on and wheels securely
chocked.
•
Be sure that the vehicle and the jack are on a hard, level surface.
System Air Purge Procedure:
Perform the following Air Purge Procedure to remove any
air that may have been introduced into the hydraulic system as a result of product
shipment and handling. This step is to be completed without any weight on the jack.
1.
Connect air supply inlet to source.
2.
Close the release valve by turning the handle knob clockwise until firm
resistance is felt.
3.
Squeeze air trigger to raise saddle. When the
saddle reaches maximum lift height, open the
release valve by turning the handle knob counter-
clockwise.
2
