8.1.4 Auto Program
With this function, you can run the internal program. You can select the desired program under
“Select
program”
. You can set the number of steps under
“Edit program”
. You can edit the
individual scenes under
“Edit scenes”
. With this function, you can run the individual scenes
either automatically, i.e. with the adjusted Step-Time.
1.
Access the main menu.
2.
Tap the <Up/Down>button until
Auto Program
is displayed.
3.
Press ENTER, the display will show
Auto Program
.
4.
Tap the <Up/Down>button
，
the display will show “
Master1
”
,
”
Alone
”
.
5.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
8.1.5 Sound Control
With this function, you can run the internal program sound-controlled.
1.
Access the main menu.
2.
Tap the <Up/Down>button until
Sound Control
is displayed.
3.
Press <ENTER>, the display will show
Sound Control
.
4.
Tap the <Up/Down>button
，
the display will show “
Master1
”
,
”
Alone
”
.
5.
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.2 Information
8.2.1 Time information
Current Time
With this function, you can display the temporary running time of the device from the last
power on. The display shows
“XXXX”, “XXXX” stands for the number of hours. The
counter is resetted after turning the device off.
1.
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
Information is displayed. Press ENTER, the display will show
Information . Tap
the <Up/Down>button until the display will show
Time Information . Press ENTER,
the display will show
Time Information
.
2.
Press <Up/Down>, the display will show
Current Time
.
3.
Press< ENTER>, the display will show
Current Time
.
4.
The display will show
XXXX
(Hours)
；
5.
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Total Run Time
With this function, you can display the running time of the device. The display shows
“XXXX”, “XXXX”
stands for the number of hours.
1.
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
Information is displayed. Press ENTER, the display will show
Information . Tap
the <Up/Down>button until the display will show
Time Information . Press ENTER,
the display will show
Time Information
.
2.
Press <Up/Down>, the display will show
Total Run Time
.
3.
Press< ENTER>, the display will show
Total Run Time
.
4.
The display will show
XXXX
(Hours)
；
5.
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
