NT24k Compact Series - Hardware Manual (Revised 06-02-2015)
84
Power Source
POE Models
PoE models come with a redundant 22-49VDC power input.
Recommended 24 VDC power supply, similar to Red Lion’s P/N NTPS-24-20.
Note:
LEDs are described in detail in
section 1.23
.
PoE Ports and Input Power
PoE capable models will attempt to power any valid PoE Powered Device (PD) that is connected to a copper port. The PoE
PD must meet the requirements for IEEE 802.3af and/or IEEE 802.3at for it to negotiate properly. Devices with invalid PD
signatures or non-PoE devices will not be powered ON.
PoE capable models will remove power from the Powered Device if any of the following conditions occur:
•
Minimum power requirements are not satisfied. The PD must draw minimum required current set forth by
802.3af/at specifications in order to be powered on.
•
Maximum power is exceeded. The PD must not exceed the power levels set by the 802.3af/at specification.
•
The PoE device signature becomes corrupted.
•
The maximum power budget is exceeded.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com