Revised 2017-08-31
Network Tab
Drawing No. LP0997-C
Tunneling
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
- 95 -
IPSec
The IPSec dialog window is split into two sections. The top section pertains to the IPSec configuration and the
bottom portion is where IPSec tunnels are created and edited.
IPSec Configuration
Enable IPSec:
Specify whether you want to enable the IPSec service. If you select No, all tunnels will be
disabled.
Enable NAT Traversal:
Specify whether all tunnels use NAT Traversal.
Coordination
Table
You may select specific actions to be performed either upon PPP connect, PPP disconnect or both.
Coordinate with...:
The available actions include Wireless Connection, PPPoE and Dial-Up PPP.