Revised 2017-08-31
Network Tab
Drawing No. LP0997-C
DNS Settings
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
- 103 -
Static
Hosts
Static Host entries may be added for local hosts, allowing the Red Lion RTU or router to resolve local host names
to IP addresses.
Click on the
Add
button on the following dialog window appears:
Enter Host Name (Required):
Enter the desired Host Name.
Enter Domain Name:
Enter the desired Domain Name.
Enter IP Address (Required):
Enter the host IP Address.
Click on the
Finish
button. You will return to the DNS Settings dialog window and the Static Hosts table will now be
populated with the recently entered data.
To delete an existing host, select it in the table and click on the
Delete
button. To edit an existing host, select it in
the table and click on the
Edit
button.
Click on the
Save
button for changes to be saved without activating them until you reboot the unit, the
Apply
button
will save your settings and apply them immediately. To revert to the previous defaults, click on the
Revert
button.