Revised 2017-08-31
Cellular Connections
Drawing No. LP0997-C
Cellular Configuration
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
- 15 -
2.1.1
Cellular
Interface
Configuration
Select Yes to enable the interface so it becomes active after the new settings are applied and upon subsequent
system start-up. Select No to disable the cellular connection feature. More information on setting up the unit’s
cellular connection can be found in
Section 3.4.1
.
2.1.2
Set
the
User
Name,
Password
and
APN
If you are using a GPRS, Edge or HSPA based card, enter the User Name, Password and APN that was provided
by your cellular carrier. This information should have been packaged with your SIM chip. If you do not have this
information, please contact your carrier’s account representative or the carrier’s support department before
proceeding.
Click the
Apply
button to save and activate the configuration.
Note:
The User Name, Password and APN can be case sensitive. Be certain that you use the exact informa-
tion as provided by your carrier.