Revised 2017-08-31
Advanced Tab
Drawing No. LP0997-C
Out-of-Band Management
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
- 237 -
3.7.3
Out
‐
of
‐
Band
Management
The Out-of-Band (OOB) Management menu item is used to configure the capability of remotely administrating a
third-party device connected via a serial cable on the Red Lion RTU or router.
Note:
Please refer to the third-party device user manual and/or technical support to determine what type of
connection is required to connect with the Red Lion RTU or router from the RS-232 serial port.
Click on the
Out-of-Band Mgt
menu item and the following dialog window appears:
Click on the
Add
button to add an instance for OOB Management and the following window appears:
Interface:
Select the interface to used.
Note:
For Speed, Bits, Parity and Stop Bits, consult the configuration of the remote device being
attached; this setting must be compatible.
Speed:
Select the desired interface speed to be used.
Bits per Character:
Select the word length (bits per character) to be used.
Parity:
Select the parity to be used. Consult the configuration of the remote device being attached, this setting
must be compatible.