Advanced Tab
Revised 2017-08-31
GWLNX
Drawing No. LP0997-C
- 250 -
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
Click on the
Finish
button and you will be directed to the IP Destinations dialog window and the IP Destinations
Table Properties will be populated with the entered data.
Click on the
Save
button for changes to be saved without activating the interface, the
Apply
button will save your
settings and apply them immediately. To revert to the previous defaults, click on the
Revert
button.
CLI
Status
The CLI Status menu item is used to view the status of the ports defined in the GWLNX configuration file if the
GWLNX application is running.
Click on the
CLI Status
menu item and the following dialog window appears:
Auto Update:
Select Yes to enable automatic updating of the log file display, the update interval can be
selected using the Select Update Interval provided immediately below this control. Manual updating is disabled
while auto-update is in effect. The current filter and maximum lines to be displayed will be used.
Be advised that when connected via a Cellular interface, the log file data collected will count towards your total
data plan usage.
Update Interval:
Select the update interval to be used when auto-update is enabled from one of the choices in
the drop-down list provided. Choices (in seconds) include: 5, 15, 30 & 60.
Be advised that when connected via a Cellular interface, the log file data collected will count towards your total
data plan usage.