Revised 2017-08-31
Preface
Drawing No. LP0997-C
Disclaimer
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
- iv -
Preface
Disclaimer
Portions of this document are intended solely as an outline of methodologies to be followed during the
maintenance and operation of the
SN and RAM
®
equipment. It is not intended as a step-by-step guide or a
complete set of all procedures necessary and sufficient to complete all operations.
While every effort has been made to ensure that this document is complete and accurate at the time of release, the
information that it contains is subject to change. Red Lion Controls is not responsible for any additions to or
alterations of the original document. Industrial networks vary widely in their configurations, topologies, and traffic
conditions. This document is intended as a general guide only. It has not been tested for all possible applications,
and it may not be complete or accurate for some situations.
Users of this document are urged to heed warnings and cautions used throughout the document.
Purpose
This manual gives specific information on how to apply and use the software functions on the Red Lion Sixnet®
Series SN and RAM
®
Cellular RTUs/Routers. The RAM models are RTUs and the SN models are routers.
This manual applies to the following products:
Audience
The manual is intended for use by personnel who are responsible for operating and maintaining network
equipment; consequently, it assumes a basic working knowledge of general Ethernet functions, the Internet
Protocol (IP), Simple Network Management Protocol (SNMP), and cellular technology.
Compliance
Statements
&
User
Information
FCC
Compliance
Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC rules.
SN
‐
66xx
SN
‐
67xx
SN
‐
68xx
SN
‐
69xx
RAM
‐
66xx
RAM
‐
67xx
RAM
‐
68xx
RAM
‐
69xx
RAM
‐
96xx
RAM
‐
97xx
RAM
‐
99xx