Network Tab
Revised 2017-08-31
Interfaces
Drawing No. LP0997-C
- 70 -
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
USB
The USB interfaces menu item allows the administrator to configure the USB port of the Red Lion RTUs or routers
to meet their needs. The default address is set for 192.168.111.1 with the subnet mask of 255.255.255.0
Click on the USB menu item and the USB IP Interface dialog window appears:
Enable USB Interface:
Select
YES
to enable the USB interface. The recommended setting for this field is
YES if using this interface.
Enter IP Address:
Enter the desired interface IP address in this field. The IP Address identifies a device on a
TCP/IP network. Every device on a network must have a unique address. The range of valid addresses for a
given network is determined by the value of the Netmask. Some addresses are reserved for special uses such
as network and broadcast.
For example, if a netmask is 255.255.255.0 and the IP address assigned to the device is 192.168.1.3, then the
range of valid addresses is 192.168.1.1 through 192.168.1.254 as 192.168.1.0 is the value reserved for the
network and 192.168.1.255 is the value reserved for the broadcast address.
The IP address should have been provided by your Network Administrator. It must be an address valid for the
network described by the value contained in the
Enter Subnet Mask
field and must not conflict with any other
device on the target network.
Enter Subnet Mask:
Enter the desired Netmask for the interface in the field provided.
Your Network Administrator should be able to provide an appropriate value. This value determines the valid
range of IP addresses allowed in the
Enter IP Address
field.
Click on the
Save
button for changes to be saved without activating the interface, the
Apply
button will save your
settings and apply them immediately. To revert to the previous defaults, click on the
Revert
button.