Revised 2017-08-31
Network Tab
Drawing No. LP0997-C
Firewall
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
- 87 -
DMZ
Rules
DMZ rules are used to configure routes through a Demilitarized Zone (DMZ).
To add a DMZ host rule
Click on the
Add
button and the following dialog window appears:
Label:
Enter a description to describe this DMZ Rule. This field is not required for DMZ Rules functionality and
it is just for DMZ Rule identification. Note: Supported characters are alphanumeric plus the following special
characters: _@-./',;:?~! #$%^&
Select Interface:
Click on the pull down-down menu to choose an interface that will be forwarded to a DMZ
Host. All incoming packets (TCP/UDP/ICMP/etc) will be forwarded to the DMZ Host specified.
Note:
Host Redirect and Service Access rules will apply first, and may prevent certain ports from
reaching the DMZ Host.
DMZ Host Address (Required):
Enter the IP address of the DMZ Host. This IP address will receive all
packets destined for the interface specified.
Note:
Host Redirect and Service Access rules will apply first, and
may prevent certain ports from reaching the DMZ Host.
Note:
Host Redirect and Service Access rules will apply first, and may prevent certain ports from
reaching the DMZ Host.
Source subnets via Whitelist:
Select a whitelist name from the list of names available in the drop-down list
box provided. Whitelists may be viewed/defined via the
Network/Firewall/ACL Rules
screen.