26
Reset to Factory Defaults
Use the following procedure to reset the Bitmap's configuration data to factory default settings. This will
erase any advanced configuration and control port settings, but presets will not be affected. Note that
this is rarely useful for troubleshooting problems with your pedal.
1. Start with the pedal unplugged.
2. Hold the PRESET, WAVE, and ON switches while plugging in power. The right LED will be solid blueish
white.
3. Release the PRESET and WAVE switches first.
4. Release the ON footswitch.
5. When the factory reset is complete, the LEDs will cycle through different colors.
6. Power cycle the pedal to continue.
