Red Sea ReefLED
™
14
Staggered Sunrise
The staggered sunrise feature allows you to create an enhanced
sunrise/sunset effect along the length of an aquarium for ReefLEDs
that are grouped together. Set a “delay time” of a few minutes and
the current D-Program will be implemented on each ReefLED in turn,
after the delay time you specify.
The delay will be implemented according to the order that the
ReefLEDs appear in the Device Manager.
By default, the ReefLEDs are ordered according to the order in which
they were added to the aquarium.
• A new ReefLED will always be added at the bottom of the list.
However, the order of ReefLEDs can be changed at any time using the
“Move” function:
Device Manager > Device Line menu > Move.
Using the Move function, you can easily change the staggered sunrise
from starting on the right side of the aquarium to starting on the left.
The “Identify” function will make the individual ReefLED blink a few
times so that you can easily identify each ReefLED when setting their
order for the staggered sunrise effect:
• Device Manager > Device Line menu > Identify.
ReefLED - Additional Effects
Acclimation
Acclimation allows corals to get used to the ReefLED lights by starting
at a lower intensity and gradually increasing the intensity every day
over the acclimation period.
For systems that have not had LED lighting in the past, we recommend
starting at 50% of the intensity set in the D-Program and allowing 50
days to reach the full program intensity. When replacing other LED
lights, a shorter period may be possible. However, in such cases we
recommend you check your corals daily for signs of stress as there are
differences between LED lighting systems.
When setting the acclimation period, the reduced intensity settings will
be represented on the D-program graph by a dashed line for the REEF-
SPEC Blue and White channels. This will also be shown in the same
format on the Dashboard.
The acclimation period will be implemented automatically on all
D-Programs that are part of your schedule.
Lunar Cycle
Activating the Lunar Cycle implements a 28-day moon phase cycle
based on the settings for the moon channel in the D-Program. This is
instead of having the same moon-light effect every day. Editing the
Lunar Cycle setting enables you to make the full moon on a particular
day of the week, when you know you will be home to enjoy it.
When setting the Lunar Cycle, the reduced intensity settings will be
represented on the D-program graph by a dashed line for the Moon
channel. This will also be shown in the same format on the Dashboard.
The Lunar Cycle will be implemented automatically on all D-Programs
that are part of your schedule.
Summary of Contents for ReefLED 50
Page 1: ...ENG User Manual...