Red Sea ReefLED
™
18
Notifications
When the ReefLED has a permanent connection to the internet, a
notification will be sent to your SMD whenever connection to the
unit is lost.
A “No communication” message could be due to a power or
internet outage, router failure or a fault with a specific connected
device.
If you have more than one Red Sea connected device and
connection to one or more (but not all) devices are lost, you will
receive a “Partial communication” message. You will then be able
to see the current status of all devices from the Device Manager.
You can set how you wish to receive some of the messages from
“Notifications” in the homepage main menu.
Overtemperature protection
The ReefLED is designed with active cooling to ensure the longevity of the
LED array.
Fan speed will vary according to the light intensity. At very low intensity
levels such as with moonlight the fan is not required. At full LED intensity
and with an ambient temperature of about 25°C/ 77°F the fan will run at
about 85% capacity. In high ambient temperature environments, the fan
speed will increase to 100% to maintain the correct working temperature
for the LED array.
If the ambient temperature is too high or airflow to the unit is restricted
the unit will automatically dim the intensity of the LEDs or shut it down
completely to prevent damage to the unit. In the event of shutdown due
to overtemperature you will need to disconnect and reconnect the power
by the DC jack to restart. Check the unit and surroundings for the cause of
the overtemperature situation.
Summary of Contents for ReefLED 50
Page 1: ...ENG User Manual...
