4
v. Locate the spare replacement fuses in the spare parts bag.
vi. Insert the new fuses. Close the fuse cover by sliding the fuse access cover
towards the cord.
vii. CAUTION: To reduce the risk of fire
– replace the fuse in mini light sets with
only 3-amp 125-volt fuse. Do not replace the attachment plug. Discard the
product if the attachment plug is damaged.
b. Extension cord fuse replacement (replaceable 8-amp 125V fuse is located in the
plug, as seen in Figure 5):
i. Grasp the plug and remove from its power
source.
ii. Locate the blown fuse by sliding access cover
on top of plug towards prongs.
iii. Remove the blown fuse.
iv. Locate the replacement fuse holder attached
to cord near the plug. Open the holder and
remove the replacement fuse.
v. Insert the new fuse. Close the fuse cover by
sliding fuse access cover towards the cord.
vi. CAUTION: To reduce the risk of fire
– replace the fuse in mini light sets with
only 8-amp 125-volt fuse. Do not replace the attachment plug. Discard the
product if the attachment plug is damaged.
•
Bulb Replacement:
a. Make certain the tree is unplugged from the electrical outlet.
b. Pull the bulb and plastic base straight from its socket. Do not twist bulbs while you
are removing them.
c. Additional bulbs are included in the spare parts bag. Replace burned-out bulbs with
replacement bulbs included with this product packing only.
•
This product contains a cord with a polarized plug to reduce electrical shock. If the plug
doesn’t fit fully into the outlet, reverse the plug as it is designed to only fit one way. If the
plug still does not fit, contact a qualified electrician. Do not use this product with an
extension cord unless the plug can be fully inserted. Do not alter or replace the plug.
For Decoration Only.
Not a Toy.
Not intended for children.
Distributed by TRACTOR SUPPLY COMPANY
5401 Virginia Way, Brentwood TN 37027
For customer support call 1-888-376-9601
www.TractorSupply.com
MADE IN CHINA
Fig.5
