RED ROCKET INSTALLATION INSTRUCTIONS
COPYRIGHT © 2015 RED.COM, INC
955-0035, REV-D
|
15
9. Click
Shut Down
to finish installing the software.
Your computer shuts down.
10. If the RED ROCKET is in a Thunderbolt chassis, disconnect power from the Thunderbolt chassis after the
computer fully shuts down.
11. Wait a minimum of 60 seconds.
12. If the RED ROCKET is in a Thunderbolt chassis, power up the Thunderbolt chassis.
13. Start the computer.
14. To upgrade RED ROCKET firmware, go to
“Upgrade RED ROCKET Firmware” on page 19
.
INSTALL RED ROCKET DRIVER (WINDOWS)
To install the RED ROCKET driver for a Windows based computer, follow the instructions below:
1. Ensure that you have already downloaded the RED ROCKET Installer. For more information about how to
download the RED ROCKET Installer, go to
“Download Driver and Firmware” on page 12
.
2. Ensure that you have already installed the RED ROCKET.
3. Click
Start
, right-click
Computer
, and select
Properties
.
The System window opens.