RED ROCKET INSTALLATION INSTRUCTIONS
COPYRIGHT © 2015 RED.COM, INC
955-0035, REV-D
|
27
THUNDERBOLT CHASSIS INSTALLATIONS
MAC PRO DOES NOT RECOGNIZE RED ROCKET IN THUNDERBOLT CHASSIS
SYMPTOM
You install the RED ROCKET driver and firmware, but the Mac Pro
®
does not recognize the RED ROCKET.
EXPLANATION
During both the driver install procedure and the firmware install procedure, the installer prompts you to restart
the computer. You must disconnect power from the Thunderbolt chassis during the restart process.
POTENTIAL RESOLUTION
When the installer prompts you to restart your computer during both the driver install procedure and the firm-
ware install procedure, disconnect and then reconnect power to the Thunderbolt chassis during the restart
process.
REDCINE-X PRO DOES NOT RECOGNIZE RED ROCKET IN THUNDERBOLT
CHASSIS
SYMPTOM
A RED ROCKET is installed in a Thunderbolt chassis that is connected to your Mac Pro. The Mac Pro recog-
nizes the RED ROCKET, but REDCINE-X PRO does not.
EXPLANATION
A Thunderbolt chassis is hot-swappable, but the RED ROCKET is not. If you have a RED ROCKET installed in a
powered Thunderbolt chassis and you disconnect and then reconnect the chassis from the Mac Pro, REDCINE-
X PRO will not recognize the RED ROCKET.
POTENTIAL RESOLUTIONS
Connect a powered Thunderbolt chassis to the computer, and then restart the computer.
Install the RED ROCKET in a Mac Pro tower instead of the Thunderbolt chassis.