COPYRIGHT © 2015 RED.COM, INC
RED ROCKET INSTALLATION INSTRUCTIONS
955-0035, REV-D
|
12
DOWNLOAD DRIVER AND FIRMWARE
To download the RED ROCKET
®
driver and firmware, follow the instructions below:
1. Go to
and locate the RED ROCKET
Installer
.
2. Download the RED ROCKET
Installer
to your computer. The drivers, firmware, and installation instructions
for the RED ROCKET are located inside the installation package.
3. After downloading, you will see the new compressed (zipped) folder in the location to which you down-
loaded the Installer (your system may unzip the folder automatically).
The folder name uses this format: RED_Rocket_Installer_vx.x.x.
4. Open the zipped folder (your system may unzip the folder automatically).
5. Extract the folder specific to your operating system (Mac
®
or Windows
®
) to your desktop.
INSTALL RED ROCKET DRIVER
INSTALL RED ROCKET DRIVER (MAC OS X)
On Mac OS X, the driver must be installed before upgrading the firmware; otherwise the firmware upgrade will
fail.
To install the RED ROCKET driver on Mac OS X, follow the instructions below:
1. Ensure that you have already downloaded the RED ROCKET Installer. For more information about how to
download the RED ROCKET Installer, go to
“Download Driver and Firmware” on page 12
.
2. Locate and open the
RED_Rocket_Installer_vx.x.x
>
RED_Rocket_MacOSX
folder.
3. Open the
REDrocket_Driver_OSX_vx.x.x.x.pkg
file.
The Install RED Rock window opens.
03
INSTALL DRIVER AND
FIRMWARE
