COPYRIGHT © 2014 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.1, REV-H
|
118
8. Go back to
REDMOTE Upgrade Utility
and click
Connect
to establish communication with the REDMOTE.
Connection is Established With REDMOTE will be displayed when connected. If the connection is not es-
tablished, then disable all internet connections and try again.
9. Go to
“Upgrade REDMOTE Firmware (Macintosh)” on page 118
.
UPGRADE REDMOTE FIRMWARE (MACINTOSH)
The following information will guide you through proper updating of your REDMOTE firmware.
1. Download the
REDMOTE Firmware
file located at
NOTE:
Review the
read_me_redmote_vX.X.XX
instructions contained in the
REDMOTE_vX.X.XX.zip
file.
2. Uncompress the zip file.
3. Open the
REDMOTE_vX.X.XX
folder.
4. Click
Select File
in
REDMOTE Upgrade Utility
.
5. Open the
redmote.1.bin
file in the
REDMOTE_Firmware_vX.X.XX
folder.
The following displays: “Selected File: redmote.1.bin”.
6. Click
Start Upgrade
.
The following displays: “File Transfer Progress”.
The REDMOTE displays the following: “Upgrading Firmware…”. A green status bar show sthe progress of
the upgrade. The upgrade process can also be tracked on another display.
After the file transfer is completed, the REDMOTE displays the following: “Firmware Upgrade Successfully
Done”.
7. Click
OK
.
8. Click
Disconnect
to close the REDMOTE Upgrade Utility.
The REDMOTE reboots.
After the upgrade is complete, the REDMOTE displays “POWER UP” and then “SEARCHING”.
9. Select
Cancel
.
10. Go to
Settings
>
Maintenance
>
System Status
>
Camera Info
and verify the current REDMOTE firmware ver-
sion.
The REDMOTE upgrade is complete and you can now attach it to the DSMC BRAIN.
NOTE:
You may not need to pair the REDMOTE after upgrading REDMOTE firmware. However, you must pair
the REDMOTE after you upgrade camera firmware.
UPGRADE REDMOTE (WINDOWS)
INSTALL REDMOTE UPGRADE UTILITY (WINDOWS)
The REDMOTE Upgrade Utility allows you to upgrade the firmware on your REDMOTE.
NOTE:
You must pair the REDMOTE to the camera after you upgrade the REDMOTE with the REDMOTE Upgrade
Utility.
1. Download the
DSMC Toolkit
file located at
2. Uncompress and open the
DSMC_Toolkit_vX.X
zip file.
3. Open the
DSMC_Toolkit_vX.X
zip file.
4. Open the
REDMOTE_Upgrade_Utility
folder.
5. Open the
Win
folder.
6. Open
REDMOTE_upgrade_setup.exe
.
7. Click
Extract All
.
Summary of Contents for SCARLET-X
