3
ON
4. Pairing
Turn the car’s power switch ON. Once turned on the car’s headlights (white)
and rear headlights (red) will begin to flash.
Turn ON the remote control by pressing and holding down the circular button
until the red indicator light turns on and begins to flash.
The flashing indicator lights on both the remote control and car indicate that they
are in pairing mode. Once both have been turned on, the remote control and car
will automatically begin to pair. Once paired successfully, all indicator lights will
stop flashing and hold a solid light.
5. Operation Instructions
Note:
The remote control is quite sensitive, please use gentle gestures and
motions when using the remote control. This will give you the best
performance and control over the car.
Tilt the remote forwards and the car
will move forwards.
Tilt the remote backwards and the
car will move backwards (reverse).
