27
3
USER GUIDE
The Input Status screen displays a summary of the inputs to the system. The Solar input is
the priority, providing as much usable input power as possible. If another source is present
and the Solar input is not providing maximum (30A) input, the other source will attempt to
make up the remaining allowable input power. This screen provides input voltage level as
well as percentage (bar graph) of input power provided. Only two sources are used at any
one time. If a source is not detected a circle with a line diagonally through it will display
indicated that the source is not present. If the Solar and AC inputs are both in use and the
DC input is detected, the DC voltage will be displayed however the bar graph will display
the not available symbol.
Solar Information Screen
Battery Charge Screen
Home Screen (Clock)
Output Status Screen
The Solar Information screen displays information on the power and voltage output
of the solar panels. From this screen you can access a log of daily power generation
measured in Watt Hours. The log will store up to 7 days of data and will overwrite,
storing only the last 7 days at any one time.
Clear Logs (Hold to Confirm)
Previous Day Solar Information
Input Status Screen
Next Day Solar Information
The Output Status screen displays a summary of the current flow of the system. The
screen will display current from The Manager30 unit, current in to or out of the battery and
current provided to the loads. The direction of the current flow is indicated by the arrows,
and a moving white dot.
N/A
Input Status Screen
Home Screen (Clock)
Charging Status Screen
The Charging Status screen displays the charging status of The Manager30, including
Charge Stage, Charge Mode and Battery Voltage and Battery Temperature.
Change Charging Mode
Output Status Screen
Home Screen (Clock)
Home Screen (Clock)
The Change Mode screen allows switching between Touring and Storage modes.
Remember to disconnect all loads before setting Storage mode.
Confirm Mode Selection
Change Mode Selection
Charging Status Screen
Change Mode Selection
NOTICE
When using the charger in Storage mode, make sure that all loads are disconnected from the house
battery under charge. Failure to do so may cause the house battery to be under charged, give false
readings on the State of Charge indicator and possibly cause damage to any loads connected.
