13
EGL624
TM
TECHNICAL SPECIFICATIONS
Laser Wavelength
635nm <1mW
Laser Class
II
Range with Receiver
500m Diam Rotating
Horizontal Accuracy
±1.5mm/20m
Vertical Accuracy
±3mm/20m
Rotation Speeds
800rpm, 300rpm, 5rpm
Self Levelling Range
±5
o
Temperature Range
-10
o
C - 45
o
C
Scan Angles
180
o
, 90
o
, 45
o
, 10
o
IP Dust Water Resistance
IP66
Power
4 x “C” Alkaline or Ni-Mh pack
Low Power
Power LED Flash
Size
178x146x188mm
Weight
2.25Kg
Technical Specifications
Calibration & Self Check
All Redback Lasers have been checked for calibration and certified by one
of our technicians here in Australia prior to despatch and should under
normal conditions not go out of calibration. A calibration certified sticker
with the date and name of technician is located on the laser itself. It is
worth checking calibration from time to time particularly after any known
knocks or drops. An easy way to continually check calibration is to always
double check you work with the laser located in a different position or use
an alternate vertical line. Various other methods for checking calibration can
be found at
www.redbacklasers.com.au/downloads
or the laser can
be returned to our service department for checking and re-calibration. We
at Redback Lasers provide a once off free calibration and check within the
duration of the warranty period see page 16 for details.
www.redbacklasers.com.au
Summary of Contents for EGL624
Page 1: ......
