20
9.7.1 Press the key
in the normal
measurement mode to enter the automatic
measurement subroutine, as shown in
Figure 25;
Figure 25
At this time, the measurement reference
changes to the laser line as the reference
(see the first icon in the status bar); a line of
prompt lines is displayed at the bottom of the
LCD; if the laser level signal is not received,
"no laser" will be displayed;
9.7.2 When the instrument receives the
laser signal of the laser level, it will display
Summary of Contents for LLRMM30
Page 26: ...25 c Connecting with staff ...