6
between fine measurement (±1mm) and
coarse measurement (±3mm) modes. The
detection accuracy indicator on the LCD is
shown in the figure below.
As shown in the figure: the top one is the fine
measurement, the bottom one is the coarse
measurement;
Figure 5
3.
Short/long distance mode selection
When the instrument is turned on, the
instrument is in the long-range mode, if you
want to receive strong signals, you need to
hold down the key
to switch to the
short-range mode to receive signals; There
are text prompts at the top left of the screen:
Far, Near.
Summary of Contents for LLRMM30
Page 26: ...25 c Connecting with staff ...