Redback® Proudly Made In Australia
8
3.1.3 Edit the Clock Time
This option sets the current time.
After selecting the “Edit Time on Clock” option from
the menu shown in Fig 3.3 the LCD will display the
screen shown in Fig 3.13 where the cursor flashes on the
current day.
Pressing the up and down buttons will scroll through the
days Monday to Sunday. Pressing “Enter” will confirm
the day and then move the cursor to the hour option as
shown in Fig 3.14.
Press the UP and DOWN
buttons to change the
hour/min/secs.
Enter
Press the ENTER
button to make your
selection
Menu
Press the MENU
button to exit at any
time.
Clock Time
Monday
00:00:00 Edit
Monday
01:00:00 Edit
Monday
02:00:00 Edit
Monday
22:00:00 Edit
Monday
23:00:00 Edit
Press the +10 button to
change the
hour/min/secs.
+10
Press the UP and DOWN
buttons to change the
day.
Enter
Press the ENTER
button to make your
selection
Menu
Press the MENU
button to exit at any
time.
Clock Day
Monday
00:00:00 Edit
Tuesday
00:00:00 Edit
Wednesday
00:00:00 Edit
Saturday
00:00:00 Edit
Sunday
00:00:00 Edit
Enter
3) Edit time
on clock
Fig 3.13
Fig 3.14
Change the hour by pressing the +10, up and down
buttons and press “Enter” when finished. The cursor
will now move to the minute section of the clock time.
Repeat the above procedure to change the minutes
and press “Enter” when finished. The cursor will now
move to the seconds section of the clock time. Repeat
the above procedure again to change the seconds and
press “Enter” when finished. The menu button can be
pressed at any time to exit the setup. The clock time is
now set.
After completing the clock time, the screen will change
to the current time.
