Original Instruction
9 / 13
g) Use the power tool, accessories, and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. The use of the power tool for operations
different from those intended could result in a hazardous situation.
h) Do not modify the tool, or use unauthorized attachments or accessories. Using the machine in a way
that was not intended to be used could cause an injury to the operator or bystanders or damage to the
tool.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. The use of any other battery packs
may create a risk of injury and fire.
c) When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Assembly and Operation
IMPORTANT CAUTIONS
Always remove the battery when the Ice Auger& SOIL AUGER is not in use, or before maintenance or to
free the blade when stuck.
The Ice Auger Ice Auger& SOIL AUGER has a sharp blade that can cause injury or damage to property.
Always use the blade protector when the tool is not in use.
This tool is for drilling into ice or earth Do not use it for any other purpose or with accessories not supplied
by REDBACK. Never attempt to modify the tool, or to bypass any of the safety features.
USE OF THE ICE AUGER& SOIL AUGER
1. Follow the instructions below to charge the battery before use. Three different batteries are available
which give different run-times
2. Fit the Auger to the machine. To do this put the auger onto the output shaft on the machine. Align the
bolt holes and use the bolt supplied to lock it into place. Always check that this bolt is tight before each
use.
3. Remove the blade guard and fit the battery to the machine.
