background image

1. Before Using The RS10XT

2. Technical Data

3. Main Features

Thank you for purchasing the Redcat Racing RS10XT rock crawler.

The RS10XT is a hobby grade vehicle and is not a toy. Please read the entire manual before attempting to operate this 

vehicle. 

Before running the RS10XT, please look over the entire vehicle to ensure there are no damaged or loose parts. Once the 

vehicle has been used, we can only assume broken parts are a result of improper use. Be sure to check the vehicle over 

before use.

• Length: 450mm
• Width: 268mm
• Height: 148mm
• Wheelbase: 317mm-320mm (adjustable)
• Motor:

 T

wo RC390 motors

• Wheel Dia: 130mm
• Wheel Width: 55mm
• Servo:

 T

wo 15kg servos

• Gear Ratio: 1 :38.6 (10

T

 motor pinion used),

1 :48.2 ( 8

T

 motor pinion used)

• Battery: Ni-MH 7.2

v

, 1800mAH (stick battery)

This data is subject to change without notice as result of product improvement.

 

Aluminum side plates

• Rigid radio plate
• Low C.O.G battery tray
  (holds stick battery)

• Computer radio with four 

   wheel steering.

• Crawler ESC w/ Cooling Fan

• Lots of articulation enables the 

  RS10XT to maneuver the 
  toughest terrain.

• Updated 4-link suspension 

  design offers the ultimate in 
   crawling performance.

 

Authentic aluminum bead-lock 

  rims secure the tires during 
  hard core of

f-road use.

 

Adjustable wheel base provides 

  many setup options. There are 
  three mounting options on the 
  lower frame rail.

 T

wo 15KG Servos perform 

   reliable steering tasks, 

   Servo/Motor-on-axle design 

   puts the weight where you 
   need it.

• Shock location can also be 
  adjusted as desired. Unscrew
  the lower mount and adjust it in 

  or out towards your desired
  position.

2

Summary of Contents for RockSlide S10 XT





















Reviews: