16
3.3.2
Manually support the ladder and twist the top end
out of the railing.
- to be reinstalled with the MAV Chopper
3.3 Ladder Removal
3.3.1
Remove hardware (
H1
) x4 from the back side of
the ladder (
E
) mounting the nylon blocks (
H
) x2 around
the pivot tube (
C
)
- to be reinstalled on new pivot frame
- reassemble hardware onto blocks
C
H
H
H1
E
3.2.5
Remove mounting hardware (
G1
) x 2 attaching the
gas spring mount brackets (
G
) x2 to the upper inside
combine walls - both sides
- ensure bolts do not fall out of sidewall
- place nuts back on bolts
- not to be reused
G
G1
