- 6 -
DS3100
BRIEF DESCRIPTION
RINK Disk Spreader DS3100
serves for spreading fine-grained loose grit such as sand,
gravel and similar materials. Spreader system of the disk spreader is driven by a gear unit
with hydraulic motor for conveyor belt and a hydraulic motor for every spreader disk. The
rotation speed of the hydraulic motors for the conveyor belt and spreader disks is
continuously adjustable by a flow regulator. Thus the grit can be metered. Spread width and
volume can be defined by driving speed, spreader disk and conveyor belt speed.
TECHNICAL DATA
Dimensions of RINK Disk Spreader DS3100
Length ................................................................................... 4.80 m
Width ..................................................................................... 2.30 m
Height ................................................................................... 2.05 m
Load quantity
........................................................................... 3.0 m
3
Weight
permissible total weight ........................................................ 6500 kg
permissible axle load ............................................................ 6000 kg
permissible drawbar load ...................................................... 800 kg
empty weight ..................................................................... .. 1300 kg
Spread width
(continuously adjustable) ................................... up to 12 m
Spread thickness 0.3 - 15 mm
Tyres
......................................................................................... 4 x 19.0 - 45/17-10
Tyre pressure
........................................................................... 2.00 bar
Permissible maximum speed
................................................. 25 km/h
Tractor power
........................................................................... 33 KW (45 HP)
Hydraulic power requirements
Oil
minimum flow rate for the towing vehicle ........................ 25 l/min
Oil minimum pressure for the towing vehicle ........................ 140 bar
The name plate is placed on the front (right) of the spreader.
