background image

 

 

2

FOREWORD 

 
Congratulation on your Power Box Rake purchase. For safe and long-lasting operation of this 
Power Box Rake, it is necessary to read and to understand this user manual. It is impossible 
to work safely with this machine without complete knowledge of the content of the user 
manual. 

The Power Box Rake is not a machine that works independently. It is the user’s responsibility 
to use the correct tractor or other towing vehicle. The user must also check the towing 
vehicle/Power Box Rake combination on safety aspects such as noise level, user instructions 
and risk analysis. 

The following pages deal initially with the general safety instructions. Every user should know 
these safety instructions and apply them. At the end of this page, a registration card is 
inserted. This registration card should be returned to enable us to deal with potential future 
claims. 

This user manual lists many instructions that are numbered in sequence. You should follow 

this sequence. A 

 is an indication of a safety instruction. A 

 means a tip and/or note. 

All information and technical specifications provided at the moment that this document is 
published are the most recent ones. Design specifications may be changed without prior 
notice.  

This document is a translation of the original operating instructions. 
Upon request, the original operating instructions are available in Dutch. 
 

WARRANTY CONDITIONS 

WITH DELIVERY THIS BLEC-REDEXIM MACHINE IS GUARANTEED AGAINST 
MATERIAL DEFECTS. 

THIS WARRANTY IS VALID FOR A PERIOD OF 12 MONTHS FROM THE PURCHASE 
DATE. 

BLEC-REDEXIM WARRANTIES ARE SUBJECT TO THE ‘GENERAL CONDITIONS FOR 
SUPPLY OF PLANT AND MACHINERY FOR EXPORT, NUMBER 188’ THAT ARE 
PUBLISHED UNDER THE AUSPICES OF THE UNITED NATIONS ECONOMIC 
COMMISSION FOR EUROPE. 

 

REGISTRATION CARD 

For your own information, fill in the table below: 

 

Serial number of the machine 

 

 

Dealer name 

 

 

Date of purchase 

 

 

Remarks 

 

 

 

Summary of Contents for BLEC POWER BOX RAKE 80
















Reviews: