9
2.0
ASSEMBLY INSTRUCTIONS
EASY CORE 104
Fig.7
1.
UNFOLD
the upper handle (A, Fig.7) and slide handle lock loops (B, Figure X) into
place to secure the upper handle to the lower.
2.
ATTACH
the tine lift cable (C, Fig.7) to the tine lever (D, Fig.7) in the center of the
handle by inserting the pin into it. Then attach the bail cable (E, Fig.7) to the bail (F,
Fig.7). Check to make sure the cables are functioning properly before operation and
not binding.
3.
CHECK
engine oil level and fll to proper level. Also check oil in gear reduction
reservoir and fll if necessary.
See engine owner’s manual for type and amount of oil
to use.
4.
CONNECT
spark plug wire. Set the engine stop switch (G, Fig.7) to the ON position.
