4
If
modifications
to the Easy Spread have been made, then the current CE marking is
cancelled. The person that has made these modifications has to apply for a
new CE
marking himself
.
Check the Easy Spread for loose bolts, nuts and components before every operation.
If present, check the hydraulic pipelines regularly and replace these when the hydraulic
pipelines are damaged or appear old. The pipelines that are replaced should comply with
the technical requirements of the manufacturer.
If a hydraulic installation is present, you should
always
make it pressure-free before
working on this installation.
NEVER
use the Easy Spread in the absence of protective guards and safety stickers.
NEVER
crawl under the Easy Spread.
If necessary, tilt the Easy Spread.
NEVER
step off the tractor while the motor is running.
When carrying out maintenance, adjustments and repairs, it is necessary to block the
Easy Spread in order to prevent it from sinking away, driving off and/or sliding off.
Always switch off the tractor motor and take the tractor’s key out of the ignition
in
carrying out maintenance, adjustments and repairs
(Figure 2)
.
Figure 2
Use only original Easy Spread parts for maintenance or repairs because of the safety of
the machine
and
of the user.
Only authorised technical personnel may carry out repairs to the Easy Spread.
Keep a record of the repair activities.
(5) The general applicable health & safety (Dutch: ARBO) regulations must also be followed
in addition to the instructions in this user manual.
Relevant traffic regulations also apply in case of using public roads.
Transporting persons is not permitted!
Do not use the Easy Spread in the dark, in heavy rain/storm or on slopes with an
angle larger than 20 degrees.
