18
13.0 ADJUSTING THE TENSION OF CHAINS
The Extreme Clean II is standard equipped with adjustable chain wheels. Depending on the
intensity of using the machine, the driveline could be affected by wear and tear.
The chain should then be tightened.
Fig. 10
Adjustment is carried out as follows:
!!
Make sure that the Turf-Stripper is blocked well and cannot move on
its own accord !!
!!
Make sure that the PTO is detached from the Turf-Stripper !!
1. Remove the safety guard (1).
2.
Check the tension of the chain. The stretch should be 5 mm (0.2”).
3.
When the tension isn’t correct. The tension should be adjusted.
4. Loosen the lock nut (2).
5.
Adjust the nut (3) and use it to adjust the tension of the chain.
6. Tighten the lock nut (2).
7. Put the safety guard back in its place.
