background image

 

3

 

!

SAFETY INSTRUCTIONS

 

 

     

Figure 1

 

 

     

 

 

The Extreme Clean II

 

 is designed for safe use. 

This can only be achieved if you completely follow 
the safety instructions described in this manual.

 

Read and understand

 

(Figure 1)

 the manual 

before

 

you start using the Extreme Clean II. 
If the machine is not used as described in this 
manual, this can result in injuries and/or damage 
to the Extreme Clean II. 

 

 

 
1.  The user must be an expert in using the machine. The machine should be 

professionally adjusted for cultivating the subsoil. 

 

The manufacturer will not accept any liability for unprofessional use and its resulting 
damage. All risks occurring with this are entirely at the expense of the user. 

Not following the use, maintenance and repair instructions prescribed by the 
manufacturer is also considered unprofessional use of this machine. 

 

Inspect the area to be treated 

before

 using the Extreme Clean II. 

Remove loose obstacles and avoid irregularities. 

 

2.  The Extreme Clean II is manufactured according to the latest technical 

understanding and is safe to use. 

 

When unskilled people use, maintain or repair the machine, this could result in 
injuries to the user 

and

 to third parties. 

This must be avoided

!

 

 

Always use the Extreme Clean II in combination with the correct tractor as described 
in the technical data. 

 

3.  All persons assigned to operate, maintain and repair the Extreme Clean II by 

the owner must read and fully understand the operation manual and in 
particular the chapter on 

Safety Instructions

 

The user is responsible for a 

safe Tractor/Extreme Clean II combination

This 

entire combination must be tested

 for noise, safety, risk and user friendliness. User 

instructions should also be drafted.

 

 

4.  The user is 

obliged to check

 the Extreme Clean II for 

visible damage and 

defects

 before using it. 

Modifications to the Extreme Clean II (including its operations) that have a negative 

impact on safety must be rectified immediately. 
For safety reasons it is in principle not permitted to make changes or adjustments to 
the Extreme Clean II (except those approved by the manufacturer). 

Summary of Contents for Extreme Clean II 1200




















Reviews: