4
If
modifications
to the Extreme Clean II have been made, then the current CE
marking is cancelled. The person that has made these modifications has to apply for
a new
CE marking himself
.
Check the Extreme Clean II for loose bolts, nuts and components
before
every
operation.
If present, check the hydraulic pipelines regularly and replace these when the
hydraulic pipelines are damaged or appear old. The pipelines that are replaced
should comply with the technical requirements of the manufacturer.
If a hydraulic installation is present, you should
always
make it pressure-free
before
working on this installation.
NEVER
use the Extreme Clean II in the absence of safety stickers.
NEVER
crawl under the Extreme Clean II.
If necessary, tilt the Extreme Clean II.
NEVER
step off the tractor while the motor is running.
When carrying out maintenance, adjustments and repairs, it is necessary to block the
Extreme Clean II in order to prevent it from sinking away, driving off and/or sliding off.
Always switch off the tractor motor and take the tractor’s key out of the ignition
in carrying out maintenance, adjustments and repairs
(Figure 2)
.
Figure
2
Use only original Extreme Clean II parts for maintenance or repairs because of the
safety of the machine
and
of the user.
