21
12
14
6
16
19
15
16
17
10
9
18
11
1
5
4
13
14
7
8
6
6
2
20
22
23
26
25
24
3
X
Y
Fig.11.
16.1 OPTIONS, CORE COLLECTOR.
An easy mountable core collector is available for the 7316. The part number is 920080.
ASSEMBLING INSTUCTIONS ( see Fig 11):
-
Preparation of the Verti-Drain:
-
Fit eye bolts 24 to the main frame 26
-
Assemble bushes 15 with the new longer bolts I to the rear roller supports.
@ These bushes can stay on the machine all the time
@ Use washers 16 to align the bushes to the rear roller scraper support.
-
Assembling the core collector itself:
-
Assemble supports 17 with eye bolts 9 and nuts 10/11 to the main collector plate 1
-
Screw the side panels 2/3 with bolts 7 and Bushes 8 to the main collector plate 1
-
Assemble the rubber strip 12 with bolts 13, washers 14 and nuts 6 to the plate 1
-
Assemble all the sheet springs 4 , well aligned, to the main plate 1.
@ Choose for the time being the centre hole for bolts 7. This setting can be changed later
@ The side panels 2/3 should not be tight, but moveable around the bushes 8.
