5
Commissioning
Check to make certain the appliance is not damaged. In case of any damage,
contact your supplier immediately and do
NOT
use the appliance.
Remove all the packing material.
Place the appliance in the middle of a steady surface and level the appliance.
Make sure the appliance is placed 10CM from every other object or walls.
WARNING!
The space is necessary for proper ventilation and for any
condensation that might occur on the sides or back of the appliance.
Make sure the appliance is not placed next to any sources that rediate heat (for
example a heater, stove or oven).
Make sure the temperature in the proximity of the machine is between 5 and 30
degrees. Other temperatures may cause the cooling capacity to drop or even
damage the appliance.
Position the appliance in such a way that the plug is accessible at all times.
Clean the accessories and the appliance with lukewarm water and a soft cloth
before using it for the first time (usd water with a very mild detergent).
When using the cooler, you can change the shelfs to the desired height.
WARNING!
Do not use aggressive or caustic detergents. Also do not use any
gasoline holding products or solvents. Make sure no water enters the appliance.
Follow the steps indicated in the next champte ‘Operation’.
