redgumbrand
.com.au
5.
ASSEMBLY
- FRAME
The front and rear frames of the
knee walker need to be
fixed together:
1. Line up the frames as shown.
2. Insert the tubes on the rear frame
into the tubes on the front frame.
3. Depress the press button
to allow the frames to
continue to locate.
4. Keep bringing the frames
together until the press
button locates in the hole.
5. Insert the bolt into the
hex shaped hole on the
upper tube.
(Ensure hex head of bolt
lines up with hex hole)
6. Screw on knob to lock
frames together.
Knob
Hex head bolt
Press button
