redgumbrand
.com.au
6.
ASSEMBLY
- FIT FRONT WHEELS
Please follow these steps to fit front wheels to frame:
1.
Put the unfolded frame on its side.
2. Offer up leg with wheel to FRONT LEG of side frame.
Ensure wheel is facing toward OUTSIDE of frame.
Align holes in leg with press button on frame.
3. Slide leg onto frame.
4. Push in press button and continue to slide leg onto frame until press button pops
out of hole in leg. (Refer to page 7 for walking frame height adjustment)
5. Repeat process to fit other
leg with wheel onto frame.
1. Push in press button
2. Slide leg onto frame until press
button pops out of hole in leg.
IMPORTANT NOTE
Press button MUST protrude
3mm out from tube when
properly located in place.
