6
How to use your REDGUM Tuner
At the front of your tuner is an on/off switch, and several push buttons
These are used to turn the amplifier on and off, and to select the many
functions. They are listed below.
1 – Power on/off switch: Rocking down will turn the power on.
2 – Display: Channel, band and frequency information.
3 – Signal Strength: AM of FM signal strength is shown.
4 – ST/MO: Use this button to select between stereo and mono.
5 – FM: Press to select the FM Band
6 – AM: Press to select the AM Band
7 – Display: Press this to display and enter the time mode.
8 – Down/Hour: Press this to set the Hours on the clock or move the
tuning frequency down.
9 – Up/Min: Press this to set the Hours on the clock or move the tuning
frequency up.
10 – Memory Locations: These are the preset buttons for stored stations –
FM(1-16) AM(1-8)
11 – ME/Set: Hold this button and press the desired memory location to
store station presets. OR Hold this button and press the Hour/Min
buttons to set the clock.
12 – PS: Press this button to search the memorised stations
13 – Stereo: This lights when stereo mode is selected. (If signal is ‘noisy’,
selecting Mono will improve the quality.)
