Redkite Savanna, Instructions Manual

Important Safety Information

Read these instructions before fitting the car seat in your car or stroller so that you are 

familiar with it and avoid any potentially dangerous misuse.

•  The 

Savanna

 group 0+ car safety seat has been subjected to all safety tests and is approved 

under European standard ECE R44/04, for children of weight from 0 to 13 kg 

(0 to 12-15 months).

•  IMPORTANT: The 

Savanna

 group 0+ car seat, must be installed facing opposite to the 

normal forward movement of the car, on seats without airbags. Do not install the 

Savanna

group 0+ car seat on backward facing seats or seats arranged facing each other.

•  WARNING: Read the instructions carefully before use and retain for future

reference. Failure to closely follow the installation instructions for the car

safety seat will put 

your child at risk.

•  The assembly and installation operations must be conducted by adults.

•  Avoid inserting fingers into the mechanisms.

•  Install this group 0+ car safety seat facing opposite to the normal forward movement of the 

vehicle.

•  Death or serious injury can result if this car safety seat is installed on seats with airbags.

•  Eliminate danger by disabling airbags surrounding the position of the car safety seat.

•  In the case of rotating or movable seats it is important to install this safety seat facing 

opposite to the normal forward movement of the vehicle.

•  When traveling take special care to make sure that luggage or other objects do not injure 

the child in the safety seat in the case of accidents.

•  Do not use installation methods different from those indicated. This would result in the risk 

of detachment from the seat.

•  Car safety seat, group 0+, “Universal” approved under European standard ECE R44/04 for 

children of weight from 0 to 13 kg (0 to 12/15 months). Suitable for installation on the 

majority of vehicle seats, but not all.

•  The car safety seat can be correctly installed if the vehicle’s use and maintenance manual 

indicates compatibility with “Universal” group 0+ restraint systems.

•  This safety seat is classed as “Universal” in compliance with stricter approval criteria than 

previous models that do not have approval labels.

•  The safety seat can only be used in approved vehicles, fitted with static or inertia-reel three-

point seat belts, approved under regulation UN/ECE no. 16 or equivalent standards. It must 

not be used with two-point or lap seat belts.

•  Ensure that the three-point car seat belt fixing the safety seat is always taut and not twisted. 

It should be replaced in the case of heavy stress as a result of an accident.

•  Never leave the child unattended in the safety seat: observe him/her even when sleeping.

•  Never remove the child from the seat while the vehicle is in motion.

•  Make sure that the safety seat is protected from any mobile parts of the car seat or doors.

•  To avoid the risk of falling always use the safety seat harness even for transport outside the

vehicle. Adjust the height and tension of the straps ensuring that they are snug to the child’s

body without constricting him/her too much. Check that the harness is not twisted and that 

the

child does not release it.

•  NEVER lift the car seat by the hood.